User reports
0
Near baseline. 0 in the last hour. Typical hour is about 0.
Damn, is it down?
All services / Smart home
simplisafe.com · Smart home
Checks are succeeding and user reports are near the baseline.
Live diagnosis
Tests simplisafe.com from your browser and compares it with our checks, the official status, and user reports.
Press Run testNothing leaves your browser except a request to the site and to us.
0
Near baseline. 0 in the last hour. Typical hour is about 0.
Reaching it
Last check reached it in 1388 ms · 2 min ago.
No status feed
SimpliSafe does not publish a status feed we can read.
| Time (UTC) | Reports | Baseline | Latency | Failed checks |
|---|---|---|---|---|
| Sun 11 | 0 | 0.0 | 444 ms | 0 |
| Sun 12 | 0 | 0.0 | 385 ms | 0 |
| Sun 13 | 0 | 0.0 | 555 ms | 0 |
| Sun 14 | 0 | 0.0 | 448 ms | 0 |
| Sun 15 | 0 | 0.0 | 510 ms | 0 |
| Sun 16 | 0 | 0.0 | 416 ms | 0 |
| Sun 17 | 0 | 0.0 | 448 ms | 0 |
| Sun 18 | 0 | 0.0 | 430 ms | 0 |
| Sun 19 | 0 | 0.0 | 412 ms | 0 |
| Sun 20 | 0 | 0.0 | 1388 ms | 0 |
90 days ago → today. Uptime is from our own HTTP checks; outages are incidents that lasted long enough to list. We have 1 days of data so far, so the 90-day numbers fill in over time.
Embed this status badge · JSON
No outages on record for SimpliSafe yet. Outages of 10 minutes or more get their own page here.
One report per service every 10 minutes from this network. No account.
Get an email when SimpliSafe goes down and when it recovers. Free. Confirm by email, unsubscribe anytime.
Checks are succeeding and user reports are near the baseline.
Three signals. Anonymous reports are compared with the usual volume for this hour. HTTP checks from Cloudflare have to fail twice in a row before we call our side down. When the vendor publishes a status JSON feed, that incident level is included too.
About every five minutes. The cron runs each minute and rotates through the catalog, so a full pass takes a few minutes.